KRIX MX-5 MODULAR SPEAKER SYSTEM
- Compact and powerful
- Versatile behind or below screen installation
- For small to mid-size rooms
A compact yet powerful entry into the Series MX range, the MX-5 packs a big punch for its size and can be installed below a conventional projector screen or behind an acoustically transparent screen.
For the movie lover with a small to medium size room, the MX-5 provides big sound in a small package, allowing versatility of installation without taking up valuable space. Boasting the Krix waveguide and large mid-bass driver, movie soundtracks will be delivered with the articulation and impact you’ve always wanted.
The MX-5 features five compact modules, allowing easy installation behind an acoustically transparent screen in a wall cavity, on a shelf or cabinetry, or below a projector screen. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.
The main speakers feature a 205mm mid-bass driver which has a 38mm voice coil wound on a high-powered aluminium former. The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide for optimum dispersion over the entire working bandwidth.
The subwoofer units feature 275mm (11”) drivers with 50mm edge-wound copper voice coil, dual spider assembly, and vented magnet assembly.
For the ultimate cinema experience at home, play it through Krix.
LCR Speaker Modules
40Hz-20kHz in room response
100 – 300 Watts RMS recommended amplifier power
92dB for 2.83 volts at 1 metre
Bass reflex, front vented
Low Frequency Driver
Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion
High Frequency Driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Gold plated spring terminals
700mm high x 315mm wide x 190mm deep (2040mm wide including subwoofer modules)
30Hz-200Hz in room response
200 – 350* Watts RMS recommended amplifier power
* The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers.
90dB for 2.83 volts at 1 metre
Bass reflex, down-firing vent
Low Frequency Driver
Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly
High level gold plated spring terminals
700mm high x 540mm wide x 190mm deep (2040mm wide including LCR modules)
Minimum Screen Size 16:9
92″ (2037mm x 1146mm)
Minimum Screen Size 21:9
90″ (2101mm x 900mm)