3D Soundbar System
The LS7200’s low-profile form contains a multi-driver array fed by a slim external amp connected via a single cable, reproducing Dolby Atmos® and DTS:X™ soundtracks with conviction.
Dolby Atmos® and DTS:X™ Object-based Audio
DTS:X™ and Dolby Atmos® are not mere improvements to existing formats; they’ve revolutionized sound mixing. Free from the channel bed, sound comes from all directions, even above, with angled drivers bouncing effects off the ceiling and into the audience. No extra speakers or cables required: just authentic and immersive sound from all around.
Stream Anything with DTS Play-Fi®*
A free app for iOS and Android™ devices, DTS Play-Fi technology collects network audio (including streaming services, internet radio, and network files) into one interface for casting to any compatible speaker. DTS Play-Fi technology supports multi-room distribution and can cast different sources to different speakers simultaneously.
Stream Music via Wi-Fi®, AirPlay, andBluetooth®
Network audio is at your fingertips and ready for streaming with Onkyo Controller app and selectable 5 GHz/2.4 GHz Wi-Fi® for connection stability. Apple device users can also mirror audio from a wide range of apps over AirPlay, or just stream from your device using Bluetooth® wireless technology.
Life’s Easy with Onkyo Controller
Our free app collects next-gen network functionalities, including streaming services and network audio, into an intuitive control interface. Perform general operations or send music to compatible speakers from your phone.
nternet Radio and On-demand Streaming
TIDAL, Deezer, TuneIn, and Pandora®* are baked into the GUI, which makes it super easy to select music using Onkyo Controller or the included remote. Spotify® subscribers can also cast direct from Spotify app to soundbar.
FireConnect™ Wireless Multi-room Audio
FireConnect™ mirrors network audio and external analog sources connected to master component—from streaming services to vinyl records—on FireConnect™-compatible speakers in other rooms. Music selection, speaker grouping, and playback management across the home are built into Onkyo Controller app for iOS and Android™.
Wide Choice of Listening Modes
A suite of advanced sound programs are on hand including new Surround Enhancer, a listening mode based on Dolby® technology, which wraps sound around the audience by means of virtual rear speakers. DTS Neural:X™, meanwhile, upmixes multichannel formats to 3D audio, while a variety of DSP programs tweak audio response to best suit music, movies, and games.
Clean and Simple Connection
How do we send five audio channels to the soundbar without a tangle of wires? Simple: signals pass through a pin-type Multichannel Audio Cable. Plug your players into the receiver, link to the TV with a single HDMI®, and let simplified installation enhance sound with a cleaner look.
AccuEQ Room Acoustic Calibration
In moments, AccuEQ measures and analyzes sound output from your speakers and performs corrections for beautifully clear and cohesive object audio in your listening space, no matter the shape or size.
Powerful Amps for Moving Sound
The receiver’s slim form contains an efficient digital amplification system with independent power supply to deliver loads of clean power to the soundbar. Wireless sub has its own 50 W amp for deep LFEs in movies and games.
Multi-Driver Soundbar System
Pairs of drivers are featured on the left, right, and center channels, while separate woofers reproduce height effects. Despite a slim profile of only 53 mm*, the multi-driver system delivers confident and cinematic sound with a clear view of the screen.
HT-L05 5-Channel Network Receiver
Dolby Atmos® and DTS:X™ Object-based Audio Playback for an Immersive Multidimensional Listening Experience
Discrete Dialog Control Technology for DTS:X™
DTS Neural:X™ Upmixing for Standard Multichannel Audio Formats
New Surround Enhancer Mode Based on Dolby® Technology
DTS Play-Fi®*1 Audio Casting and Distribution from Smart Devices
AirPlay, Spotify®, TIDAL, Deezer, TuneIn, and Pandora®*2
Dual-band 5 GHz/2.4 GHz Wi-Fi® for an Interference-free Connection
Onkyo Controller App for iOS*3 and Android™ Devices*4
Bluetooth® Wireless Streaming Technology (Version 4.1+LE)
5-Channel Digital Amplification System for Powerful 50 W/Ch Performance (4 Ohms, 1 kHz, 1% THD, 1 Channel Driven, IEC)
4 HDMI® Inputs/1 Output (with ARC/CEC Multilink Control) Supporting 4K/60p, HDCP 2.2, HDR10, and BT.2020
AccuEQ Room Acoustic Calibration for Balanced Soundfield (Setup Mic Included)
FireConnect™ Wireless Multi-room Capability*5
DSD Decoding (2.1-Channel/5.6 MHz, Multichannel 2.8 MHz) via Network, HDMI, and USB
Assignable Digital Audio Input (Optical) and Analog RCA Input
1080p Video Upscaling to 4K Resolution
FM Tuner with 40-Station Memory Preset
USB Type-A Input for USB Memory Audio Playback
Graphical User Interface and Simple Remote Controller
Tone Control (Bass/Treble) ±10 dB for Front L/R Channels
A/V Sync Function (-100 to 500 ms at 48 kHz in 5 ms Steps)
Multiple Listening Enhancement Modes to Suit Content
CinemaFILTER™ Audio Mode
*1 Enabled via firmware update (TBA).
*2 Pandora® available in the USA, Australia, and New Zealand only. Some services require a subscription.
*3 Requires iOS 8.0 or later.
*4 Requires Android 4.0.3 or later.
*5 Compatible speakers required.
LB-403 Soundbar System
Ultra-low-profile Design for Unobstructed Vision
Dual-driver System for L/R Channels, Dual Center Drivers, and Discrete Height Speakers Enabling Object-based Surround-Sound
Multichannel Audio Cable for Soundbar Connection
Solid Build Quality, Chic Style, and Excellent Finish
SLW-403 Wireless Powered Subwoofer
Powered Bass Reflex Design
Rated Output Power: 50 W (4 Ohms, 100 Hz, 1%, IEC)
16 cm Cone Woofer
Sculpted Feet and Quality Finish
Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice.
5-Channel Network Receiver (HT-L05)
Power Output: 50 W/Ch (4 Ohms, 1 kHz, 1%, 1 Channel Driven, IEC)
Dimensions (W x H x D): 435 x 70 x 325.5 mm
Weight: 4.0 kg
Soundbar System (LB-403)
Frequency Response: 100 Hz−20 kHz
Dimensions (W x H x D): 950 x 55 x 80 mm
Weight: 2.3 kg
Rated Output Power: 50 W (4 Ohms, 100 Hz, 1%)
Frequency Response: 30–200 Hz
Dimensions (W x H x D): 261 x 338 x 269 mm
Weight: 18.0 kg