KRIX ECLIPTIX
IN WALL
- Slimline magnetic grille
- Fits inside 90mm wall cavity
- Fully enclosed backbox
Designed for use as both fronts and surrounds, the Ecliptix will disappear into the room, leaving you to enjoy the soundtrack.
Perfect for distributing music throughout your home, or for a discreet home theatre experience, the Ecliptix can be used as main fronts or side and rear surrounds.
A rectangular in wall version of the Krix Hemispherix in ceiling speaker, the Ecliptix offers precise tonal matching when installed together with the Hemispherix. Designed for a 90mm wall cavity, its fully enclosed back box ensures acoustic integrity and prevents rear sound radiation from being transferred to adjoining rooms.
Bass and midrange clarity are delivered through the 100mm bass driver, with a large magnet and aluminium shorting ring, while the 25mm dome tweeter directs high frequencies toward the listener. The slim bezel paintable grille is held in place by magnets for easy installation.
For the ultimate sound experience at home, play it through Krix.
Frequency Range
65Hz-20kHz in room response
Power Handling
20 – 100 Watts RMS recommended amplifier power
Sensitivity
86dB for 2.83 volts at 1 metre
Impedance
Nominally 6 Ohms (minimum 4.2 Ohms)
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Dimensions
319mm high x 231mm wide x 99mm mounting depth
Low Frequency Driver
Nominal 100mm (4”) doped paper cone. 25mm (1”) voice coil wound on high temperature Kapton former
High Frequency Driver
26mm (1″) fabric dome, adjustable ‘eyeball’
Input Terminals
Gold plated spring terminals
Cut-out Dimensions
276mm x 188mm recommended
Weight
2kg each
*Grilles for In-Wall speakers are a standard white colour but are able to painted a specific colour at additional cost.
